Filter by brand
786 CPVC CEMENT
Rated 0 out of 5
Select options
This product has multiple variants. The options may be chosen on the product page
Elbow 90° (SDR 11–PN 16)
Rated 0 out of 5
ELBOW 90°
SDR 11 – PN 16
General Properties
| Material | HDPE-100 |
|---|---|
| Pressure Rating | SDR 17 – PN10 |
| Connection | Spigot |
| Standard | EN 12201-1 |
Elbow 90° (SDR 17–PN 10)
Rated 0 out of 5
| Material | HDPE-100 |
|---|---|
| Pressure Rating | SDR 17 – PN10 |
| Connection | Spigot |
| Standard | EN 12201-1 |
Elbow 90° (SDR 17–PN 10)
Rated 0 out of 5
ELBOW 90°
SDR 17 – PN 10
General Properties
| Material | HDPE-100 |
|---|---|
| Pressure Rating | SDR 17 – PN10 |
| Connection | Spigot |
| Standard | EN 12201-1 |
Elbow 90° (SDR 9–PN 20)
Rated 0 out of 5
ELBOW 90°
SDR 11 – PN 16
General Properties
| Material | HDPE-100 |
|---|---|
| Pressure Rating | SDR 9 – PN20 |
| Connection | Spigot |
| Standard | EN 12201-1 |
END CAP (SDR 17–PN 10)
Rated 0 out of 5
END CAP
SDR 17 – PN 10
General Properties
| Material | HDPE-100 |
|---|---|
| Pressure Rating | SDR 17 – PN10 |
| Connection | Spigot |
| Standard | EN 12201-1 |
GREY CEMENT
Rated 0 out of 5
LOW VOC PVC SOLVENT
| Color | GREY |
|---|---|
| Resin | PVC |
| Specific Gravity | 0.963 +- 0.04 |
| Brookfield Viscosity | Minimum 1600 cps |
Select options
This product has multiple variants. The options may be chosen on the product page
HP PRIMER
Rated 0 out of 5
ULTRA LOW VOC PRIMER FOR PVC AND CPVC PIPES
| Color | CLEAR |
|---|---|
| Resin | PVC |
| Specific Gravity | 0.857 +- 0.04 |
| Brookfield Viscosity | Minimum 1600 cps |
Select options
This product has multiple variants. The options may be chosen on the product page
Hydroplast COUPLING
Rated 0 out of 5
| Material | PVC-U |
|---|---|
| Production Type | Injection Molding |
| Connection Type | SxS – SCH 80 |
| Standard | ASTM D-2467 |
Hydroplast CROSS TEE
Rated 0 out of 5
| Material | PVC-U |
|---|---|
| Production Type | Injection Molding |
| Connection Type | SxS – SCH 80 |
| Standard | ASTM D-2467 |
hydroplast ELBOW 45°
Rated 0 out of 5
| Material | PVC-U |
|---|---|
| Production Type | Injection Molding |
| Connection Type | SxS – SCH 80 |
| Standard | ASTM D-2467 |
hydroplast ELBOW 90°
Rated 0 out of 5
| Material | PVC-U |
|---|---|
| Production Type | Injection Molding |
| Connection Type | SxS – SCH 80 |
| Standard | ASTM D-2467 |
Load more products
Loading...
Recently Viewed Products
A world of inspiration for your home
Online store of tiles and plumbing. Buy online. Here and now!
I should be incapable of drawing a single stroke at the present moment; and yet I feel that I never was a greater artist than now.
Like these sweet mornings of spring which I enjoy with my whole heart.
When, while the lovely valley teems with vapour around me, and the meridian sun strikes the upper surface of the impenetrable foliage of my trees, and but a few stray gleams steal into the inner sanctuary, I throw myself down among the tall grass by the trickling stream.
A wonderful serenity has taken possession of my entire soul.
Authorities in our business will tell in no uncertain terms that Lorem Ipsum is that huge, huge no no to forswear forever. Not so fast, I'd say, there are some redeeming factors in favor of greeking text, as its use is merely the symptom of a worse problem to take into consideration.
Safe delivery, ensures the movement of goods in a short time.
You begin with a text, you sculpt information, you chisel away what's not needed, you come to the point, make things clear, add value, you're a content person, you like words. Design is no afterthought, far from it, but it comes in a deserved second. Anyway, you still use Lorem Ipsum and rightly so, as it will always have a place in the web workers toolbox, as things happen, not always the way you like it, not always in the preferred order. Even if your less into design and more into content strategy you may find some redeeming value with, wait for it, dummy copy, no less.


Extension & CP Nipples